Product Description
Expand
TL;DR
Too Long; Didn't Read:
This bezel burnishing tool punch set or bezel setting punch set from ToolTreaux features 16 assorted concave, hardened steel punches and one polished hardwood chuck handle, all organized in a tidy wood storage box with metal closure. The tool set is intended for round bezel stone or other settings to ensure a precise and uniform wall; the set can also be used for tube settings or prong closures.
This bezel burnishing tool punch set or bezel setting punch set from ToolTreaux features 16 assorted concave, hardened steel punches and one polished hardwood chuck handle, all kept in a tidy wood storage box with metal closure to keep the punches tidy and organized. The tool set is intended for round bezel stone or other settings to ensure a precise, uniform and secure wall. The set can also be used for tube settings, as well as prong closures.
The set includes assorted punches with the following diameters, measured in millimeters:
2mm
2.75mm
3.75mm
4.5mm
5mm
5.25mm
5.5mm
6mm
6.5mm
7mm
7.5mm
8mm
8.5mm
9mm
If you’re wondering how this bezel burnishing tool set works, read on! Choose the appropriate-sized steel punch—one that is approximately a millimeter bigger than the outside diameter of the bezel you’re closing—and attach to the hardwood chuck handle; once attached and secure, place the punch over the setting and gently rotate, applying as little or as much pressure as needed, depending on the material you’re working with (e.g. some crystals may be very soft and require much less pressure than in comparison to working with harder materials like diamonds or topaz). If you need some additional force, the hardwood handle can also be used in conjunction with a rubber or plastic mallet.
Lastly, as mentioned above, the bezel setting punch kit tool set comes with a handy wood box for organized storage of all the assorted steel punches; the box features built-in spots for each punch with etched sizing for each, as well as a spot for the hardwood chuck handle in the center. The wood box closes with a metal clasp to keep punches tidy and secure when not in use.
Let the creativity begin – happy setting!
Features
Expand
| BEZEL BURNISHING TOOL SET: This bezel burnishing tool punch set from ToolTreaux features 16 assorted concave, hardened steel punches and one polished hardwood chuck handle, all organized in a wood storage box; the tool set is intended for round bezel stone or other settings to ensure a precise and uniform wall; the set can also be used for tube settings or prong closures | HOW THE TOOL SET WORKS: Choose the appropriate-sized punch—one that is about a millimeter bigger than the outside diameter of the bezel you’re closing—and attach to the hardwood chuck handle; once secure, place the punch over the setting and gently rotate, applying as little or as much pressure as needed, depending on the material you’re working with |
| WOOD STORAGE BOX: The bezel setting or bezel burnishing tool set comes with the shown wood box for organized storage of all punches; the box features built-in spots for each punch size with etched sizing for each, as well as a spot for the hardwood chuck handle; the wood box closes with a metal clasp to keep punches tidy and secure | PUNCH SIZES INCLUDED: The range of hardened steel concave punch sizes included in this kit consist of the following diameters: 2mm, 2.75mm, 3.75mm, 4.5mm, 5mm, 5.25mm, 5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 8.5mm and 9mm (measured in millimeters) |
| SPECIFICATIONS: Product Dimension: 3.1 x 6 x 2.8 inches; Wood Box Dimensions: 5-⅛ x 2-½ x 2-⅝ inches; Material: Hardened steel, hardwood handle, wood | |
California Proposition 65 Information
Expand
WARNING: This product can expose you to chemicals including bisphenol_a_(bpa), which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov. www.p65warnings.ca.gov
